You are here
Home > Reference Material & How to:

Considerations for Fuel Injector Size

This is a little more complicated than a simple formula.  If you know how much horsepower you want to make, you should be able to just calculate how much fuel you need right?  Well, there are more things to consider.  The first thing is crankshaft horsepower vs wheel horsepower.  Crankshaft

Going Fast with Nitrous Oxide

If you want to go faster with Nitrous Oxide you probably should know a few things before you blow your engine up.  I'll go through a few different types of kits, how to set them up, and what other changes you will need to make to keep the pistons inside

How to: Prepare for a Hurricane on a Budget.

Not everyone has hundreds of extra money sitting around to spend prepping for a hurricane, but here are some things you can do that are either free or don't cost very much. #1 Do your laundry. Your roof probably has a low chance of getting ripped off, but losing power for

Gear Ratio Calculator

Here is a little tool I made to help you guys out who are always wondering what your engine speeds are going to look like if you change gear ratios.  I have started out with just the stock 4th gen F-body stuff, but will be adding more options later on

GM LS Cam Specs

Gen 3 LS: Year       Part #            Duration*   Valve Lift   LSA Corvette LS1 97-98     12554710         199/207      .472/.479    117 98-99     12560964       199/207      .472/.479    117 2000       12560968  

DIY Computer Power Button and LEDs

Some of these links are not exactly what I used in the video, but they will work or at least get you searching in the correct area for something similar. Mini Breadboard with wires Other jumper wirers option Assorted Leds Assorted Resistors Assorted Photoresistors (5539 is what I used, but I think 5506 would work

Resizing a Carburetor Jet

I demonstrate how to resize a carburetor jet to a smaller size by soldering it and drilling a smaller hole. Plumbing Solder - Drill Bit adaptor - Tiny Drill Bits -